RentalEquip2

Cooper Turbocompressor
Rental Unit
Model: TurboTAC2000
Back To Home

Capacity: 250 HP - 1180 ICFM @ 125 PSI - Available 300 HP - 1435 ICFM @ 125 PSI - Available 350 HP - 1610 ICFM @ 125 PSI - Available
		Weights and Dimensions
Trailer Specifications:

		Length:	18 ft. 8 in.
		Width:	8 ft. 6 in.
		GVWR:	16,100 lbs.
		Hitch Type:	Pintle eye 5-1/2" O.D. x 2-1/2" I.D., height adj. ± 2-1/2" [Figure 1]
	Trailer is equipped with electric brakes and lights and is DOT approved for road travel.
	10,000 lb. capacity drop-leg tongue jack is trailer-mounted. [Figure 2]


		Figure 1 - Pintle Eye		Figure 2 - Trailer Jack

Compressor Enclosure:
		Length:	9 ft. 2 in.
		Width:	6 ft. 4 in.
		Height:	7 ft. 8 in.

	Lifting eyes provided on enclosure base, 3" I.D., 4 places.
	(Spreader bars are required if unit is to be lifted by crane.)

Trailer with compressor mounted:
		Height:	9 ft. 8 in.
		Weight:	12,500 lbs.


Specifications and Installation Requirements

Power Requirements:
		460V, 3 Phase, 60 Hz

Motor Amps at Full Load:
		250 HP	282 Amps
		300 HP	336 Amps
		350 HP	383 Amps

Customer Connections:
	Discharge Air:
		3" NPT Dixon Male spud, ground joint seal [Figure 3]

	Cooper-Supplied Hoses And Connectors:
		- (4) 3" Air hoses, 12.5 ft. long ea., 400 PSI working pressure [Figure 4]
		- (3) Double spud unions, (1) Male Spud, (1) Female spud [Figure 5]


		Figure 3 - Air Discharge		Figure 4 - Air Hose

		Figure 5 - Hose Connectors		Figure 6 - Power Connection

Electrical:
	Cooper-Supplied Electrical Cable:
		- (3) 350 MCM cables, 25 ft. long ea., customer end bare
		- "Hubbell" type connectors at compressor
		- (1) 4/0 Ground wire with lugs, 25 ft. long [Figure 6]

Back To Top